Gravimetric Certificate

ISO 17034 Reference Material Product identification

Article Code:DRE-X23105500CY
Article Name: Chioroparaffin C10-C13555%C Formula: Mol. Weight:
CAS NO.: 85535-84-8

Lot Number: G986909CY 
Expiry Date: 02.11.2023 
Storage Temperature: 20℃ ± 4℃

Storage and handingc The RM should be stored in the origina! sealed bottfe at the temperature given above.After use the botte should be tightly closed and protected from moisture and ight. The expiry date is vallo for original sealed bottles under recommended storage conditions only.

Gravimetric Data

Compound Name: Chioroparaffin C10-C13 55,5%C

Lot. No.: 106018

Purity: 100.0%

Weight: 200.005 mg 
Batch Soivent: Cyciohexane

Solvent Lot: 1093411736

Batch size: 2000.00 ml 
Concentration: 100.00 mg/l

Expanded Uncertainty U: 2.09mg/l

The uncertainty of this standard is calculated in accordance with the ISO 17034 and URACHEM/CTAC Gulde-Quantifving Uncertainty in Analytical Measurement,Second Edition.The expanded uncertainty is U(exp)= u(RM) xk where k is the coverase factor at the 95% confidence level (k=2).Uncertainty u(RM) is based on the combination of the uncertaintiles assocated with each individual operation involved in the analysis of the  product:u(RM)=Vu(char)²+u(bb)²+u(lts)²+u(sts)²;u(char)is the uncertainty of characterisation;ubb)uncertainty of homogeneity test;u(lts)uncertainty of stability test long-term；u(sts) uncertainty of stability test short-term.u(lts) and u(sts) are not included in the calculation as the stability statement is based on real evidence opposed to simulation.
Minimum samole: 1 ml is recommended as the minimal samole amount.ifless material is used.itis recommended to increase the certified uncertainty by a factor of two for hatf sample and a factor of four for a quarter of sample
Intended use:Use this RM as calibrant for chromatography or any other analytical technique

Analytical Data

Traceabiilty of chromatography: To the Intenational System of Units(SI)
instrument: GC/ECD

Injector: 320℃ 
Detection: ECD Initial

Temp: 320C for 20 min 
Column: Optima-5MS,0.25pm0.25mm

End Temp: 320℃ 
Inj.-Vol.: 1ul

Gradient: 0°C/min 
Flow: 1.0 ml/min 
Ret.Time:

Comment

Traceability: The balances used are calibrated with weights traceable to the national standards(DKD). Calibrated class A glassware is used for volumetric measurements.
Attachment: Exemplary chromatogram of given method
Certificate Revision 1-02.11.2018-N. Motler

Data file: 23105500-03-r001.dx

Instrument: ECD 
Sample name: G986909CY

Sequence Name: 2018KW44-1030a 
Inj. volume [ul]: 1.0

Injection date: 10/30/2018 9:10:14AM 
Acq. method: 320 20MIN.amx

Location: 56 
Sample Description Chloroparaffin C10-C13555%C

Signal: ECD1A 

Nr.         RT[min]                      Area[Hz*s]                        Height[Hz]                          Area%                    Width [min] 
1            2.14                            63652.70347                      1461.48                             100.00                        0.511 
              Sum                            63652.70

注：以上信息仅供参考，以产品附带证书为准。